Canon Service Tool V2000 is a software program that allows you to perform various service operations on your Canon printer, such as resetting the waste ink absorber counter, checking the ink level, printing test pages, changing the region code, and more. In this article, we will show you how to download and use Canon Service Tool V2000 for free.
How to Download Canon Service Tool V2000
Canon Service Tool V2000 is not officially available from Canon's website, but you can find it on some third-party websites that offer it for free download. However, you should be careful when downloading files from unknown sources, as they may contain viruses or malware. Here are some steps to download Canon Service Tool V2000 safely:
Make sure you have a Windows XP computer or a newer Windows OS with compatibility mode enabled.
Make sure you have the drivers for your Canon printer installed on your computer.
Go to one of the websites that offer Canon Service Tool V2000 for free download, such as [^1^], [^2^], [^3^], or [^4^]. You can also search for other websites using your preferred search engine.
Click on the download link and save the file to your computer. The file name should be something like "ServiceTool_V2000.exe" or "ServiceTool_V2000.zip".
If the file is in ZIP format, you need to unzip it using a program like WinZip or 7-Zip.
Scan the file with your antivirus software before opening it.
How to Use Canon Service Tool V2000
Before using Canon Service Tool V2000, you need to put your printer in service mode. This will allow the program to communicate with your printer and perform the service operations. The procedure for entering service mode may vary depending on your printer model and software version, but here is a general guide:
Turn off your printer by pressing the power button. Do not disconnect any cables from the printer.
Press and hold the stop button (the red triangle) and quickly press and hold the power button. Do not release the buttons.
When the power LED lights in green, release the stop button but keep holding the power button.
Press the stop button twice and then release both the power and stop buttons. The power LED should still be green and the LCD display should show two lines of text: "Service mode" and "Idle".
If your printer has a TFT screen, you may need to press other buttons instead of the stop button. Refer to your printer's manual or service manual for more details.
Now you can run Canon Service Tool V2000 on your computer. No installation is necessary. Just double-click on the "ServiceTool_V2000.exe" file. You should see a window with two tabs: "Main" and "Clear ink counter". Here are some of the functions you can perform with Canon Service Tool V2000:
To reset the waste ink absorber counter, go to the "Clear ink counter" tab and select "Main" or "Platen" depending on where your waste ink absorber is located. Then click on "Set". The program will send a command to your printer and reset the counter.
To check the ink level of your printer, go to the "Main" tab and click on "Ink absorber counter". The program will display the percentage of ink remaining in each cartridge.
To print a test page with nozzle check and other information, go to the "Main" tab and click on "Test print". Make sure you have paper loaded in your printer before doing this.
To change the region code of your printer, go to the "Main" tab and click on "Set destination". Then select one of the options from the drop-down menu: JPN, KOR, USA, EUR, AUS, ASA, CHN, TWN, LTN, BRA, CND, EMB. Then click on "Set". The program will send a command to 061ffe29dd